Currently we only have 2" wide straps as a set like the Ratchet Tie-Down Strap # 348857. We do have the Winch Strap # DL24237 which can be cut down and used but it makes more sense to get a whole new strap when you compare the pricing. view full answer...
The Replacement Left Side Ratchet Winch # DM5432 and Replacement Right Side Ratchet Winch # DM5433 are the replacement ratchets for Replacement 3-Point Standard Wheel Tie-Down Strap for Demco Tow Dollies # DM03528. view full answer...
You are correct that the Replacement Rear Wheel Tray # Y8880845 for your Yakima FrontLoader does not have the integrated ratchet for tightening the strap. Yakima actually redesigned this a number of years ago and they went to a regular strap. It can still secure the wheel on a bike just fine but you'll have to use your own strength to tighten things down.
If that feature is a make-it-or-break-it kind of deal for you then it sounds like you'll unfortunately need to switch up bike racks.... view full answer...
The Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On - Qty 2 # KS3891STR and the Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On - Qty 2 # KS99FR will fit the Universal Towing Mirrors.
The stores in Canada sell the same K-Source products like the # KS3891-2 and # KS3990 for example. view full answer...
24 inches would be enough room for the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks # EM58523-09162 to attach. The ratchet would still function just fine but your clearance above the ratchet could be inhabited if the vehicle sits lower and is above the track 24 inches back. view full answer...
All of the replacement parts for the Thule Criterium Roof Bike Rack you have mentioned are sold individually.
The Thule Replacement Ratcheting Wheel Strap, part # 853-6512, will be the replacement strap for the Thule Criterium bike rack. It is not a replacement for the button and strap. You will still need to use the button with this strap.
The Thule Replacement Wheel Strap Button, part # 7522300001, will be the button that will tighten and loosen the ratcheting strap on the wheel holder.
The... view full answer...
I'm sorry that happened, but the good news is we do have replacement straps for the K-Source Universal Towing Mirrors - Clip On - Convex Mirror # KS3891-2. So if this is the mirror you have what you can get is the following:
- Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On # KS3891STR view full answer...
We do have replacement ratcheting straps for your Swagman Semi bike rack, which are the following:
- Replacement Wheel Strap # SP494
Though the title doesn't specify Semi, these are in fact the correct straps for your rack. view full answer...
The Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On - Qty 2 # KS3891STR is what you need to replace the missing strap on your K-Source Universal Towing Mirror # KS3891. view full answer...
For the Roadmaster Tow Dolly RM3477 # RM-2050-1 the replacement Tie-Down Ratchet is # RM-2110.
The replacement wheel strap comes in the universal for wheels up to 30 inches # RM-2150.
I have linked all the above mentioned parts to this page for your viewing and purchasing convenience. view full answer...
The correct replacement strap for your Swagman Escapee Bike Rack S64693 can be found as part # S33YR on our site. This strap is black instead of green like what came with the bike rack but it still works. This comes as a single piece so you'll need to order 2 if you need to replace both straps on your Escapee.
Attached are some review videos for you to check out. view full answer...
Yes, we have the Replacement 22" Long Wheel Cradle Ratchet Straps # SA4424 and the Replacement Ratcheting Wheel Tray Strap # SA17158 for your Saris Thelma 2 Bike Platform Rack.
We also have the Replacement Rear Wheel Tray # SA22138, Replacement Hitch Tite Anti-Rattle Hitch Pin # SA3015 and the Replacement Aluminum Hitch Adapter Sleeve # SA3032 for your bike rack. view full answer...
Yes, to install the BoatBuckle G2 Retractable, Ratcheting Transom Tie-Down Straps # IMF08893 that you referenced you could simply drill a hole in your trailer frame/channel at the rear of the vehicle to install the straps. This is how it was intended to install. view full answer...
You will need to replace the whole rear wheel cradle since the ratchet part is fixed to the wheel cradle. The original rear wheel cradle was replaced with a version that will now also accommodate fat tire bikes (but it still fits the T2 bike rack). It is # 7521568001. The strap is included as well. view full answer...
The Replacement Wheel Strap # Y8880229 you referenced is for the Yakima FrontLoader # Y02103 but what it sounds like you have is the discontinued HighRoller 8002107 which looks very similar to the FrontLoader but uses the Replacement Wheel Strap # Y8880077 that you said looks like more like what you have.
I reached out to my contact at Yakima who confirmed that these 2 bike racks are commonly mistaken for one another as they look very similar. I'm attaching review videos for both racks... view full answer...
We carry the entire strap that includes the J-hooks, part # 3373028819. It's the exact replacement strap for the ratchet tie-downs # 3375480007.
That's the only way to replace the exact J-hook. I contacted Buyers Products and they don't even carry the hook as an individual part. view full answer...
You are right that the strap you mentioned isn't the correct fit, and I checked with Thule and there isn't a standalone strap available for a T2 Pro XT, but there is still an option for you. What you would need instead is to replace the rear wheel cradle, which does come with the strap attached; I verified with Thule the correct replacement is the following:
- Replacement Rear Wheel Holder Assembly # 7521682001 view full answer...
I called my contact at Swagman and asked about replacement straps for your Upright Bike Carrier # S64720.
They said the ratcheting straps will not work and there is only one replacement available. That is part # P168. There are two straps included for this number. view full answer...
A broken plastic license plate holder is unlikely to be repairable so you'll probably be best served replacing it with a sturdier corrosion-resistant unit like # CE26053A which is aluminum. It may be necessary to break off the remaining plastic pieces and to drill holes for mounting hardware.
You do not want to run your winch strap over the trailer's bow roller. It uses the secondary roller underneath to allow the trailer bow roller to properly contact the hull without interference.
If... view full answer...
For your older Thule T2 Classic bike rack, you can use the Replacement Locking Ratchet Arm Assembly for T2 Bike Carriers # 752-1272-001 which measures 31-1/2", for a longer arm, and will also accommodate for a larger tire like you're looking for.
Additionally, for a replacement wheel strap, you can use the:
-Replacement Wheel Strap for Thule T2 Hitch Mounted Bike Racks # 853-7002. view full answer...